Nanoweight robots are miniature versions of the Robot Wars radio controlled combat robots .
They weigh 25gms or less and fit completely within a 50 mm cube. They can be constructed of any materials. Combat is carried out in an arena approximatly 36 inches square with drop of sides on at least 50% of the arena perimeter. A polycarbonate protective cover must be used whenever spinner robots fight. A battle is lost once a robot has left the arena or if it has been disabled for 10 seconds.
Nanoweight Robots















 
     Antweight Forum                                                  Antweight Rules                                                           Antweight Results





       


Ten To The Minus Nine

      

Drive 2 x 6mm motor  gearboxes
Wheels 3D printed wheels / moulded rubber tyres
Weapons Selfrighting Flipper bot
Power 4.2 V 60mah Lithium Polymer
Chassis 3D Printed in red ABS
Armour  Polycarb Scoop





n

One Billionth US Style
Arenanoise
 

       
       








Drive 2 x 6mm motor  gearboxes + external gears
Wheels 3D printed wheels / moulded rubber tyres
Weapons Horizontal Spinner Titanium Blade
Power 4.2 V 160mah Lithium  + 5v switchmode
Chassis 3D printed red ABS
Armour Non







Drive 2 x 6mm motor  gearboxes
Wheels Polycarb  / moulded rubber shuffle plates
Weapons Scoop
Power  8.4V 60mah Lithium Polymer
Chassis 3D printed in red ABS
Armour Non


































Drive 4 x 6mm motor  gearboxes
Wheels 3D printed wheels / moulded rubber tyres
Weapons Invertible push bot
Power 4.2 V 60mah Lithium Polymer
Chassis 3D Printed in yellow ABS
Armour Titainium Scoops













 Main Page